Accessories

Special signal extension cable, stainless steel float, G-Sonic 100 click generator

Klickerzeugerbefestigung für den G-Sonic 10

Click generator mounting G-Sonic 10

Click generator mounting G-Sonic 10 Additional clicker generator bracket. One click generator mounting is supplied with each G-Sonic unit.

€8.50*

Click generator mounting G-Sonic 20 S, 50 S & 100

Click generator mounting G-Sonic 20 S, 50 S & 100 Additional clicker generator bracket. One click generator mounting is supplied with each G-Sonic unit.

€8.50*

G-Sonic 100 click generator

Additional click generator for the G-Sonic 100 stainless steel with 15m signal cable.Technical specifications Click generator Signal cable length 15 m Click generator Dimensions LxDiameter 180x63 mm Click generator mounting

€380.00*

Details

G-Sonic 100 click generator

€380.00*

G-Sonic click generator signal cable

G-Sonic click generator signal cable Click generator signal cable per 5 meters In addition to the standard length of the click generator, extra meters can be ordered for the extension. The standard click generator cable is directly extended by the ordered quantity during production. Signal cable diameter. 6 mm 3 strands special cable 3-pole plug Note: The maximum length for G-Sonic 10, 20, 50, 100 (not for S versions) can be max. 50m (standard length plus extension).

Content: 5 Running metre(s) (€9.00* / 1 Running metre(s))

€45.00*

Details

G-Sonic extension cable 10m 3Pin

Extension cable to extend the signal cable to the click generator. The special signal cable with the waterproof plugs (IP68) offer a high protection against dust, humidity and excellent resistance against UV radiation, alkaline earths. Several extension cables can be connected together. A total length of 20 m should not be exceeded. Signal cable length: 10 m 3 pin plug Plug diameter: 19 mm

€50.00*

G-Sonic extension cable 15m 3Pin

€60.00*

G-Sonic extension cable 20m 3Pin

€80.00*

G-Sonic Extension cable 3m 3Pin

€35.00*

G-Sonic extension cable 5m 3Pin

€40.00*

G-Sonic function control

General function control and frequency test Remark: The return to our EU workshop must be complete: electronic control unit and clicker generator. In case of a defect, outside the warranty, you will receive a cost estimate from us. Duration approx. 2 weeks Return costs Europe included

€60.00*

G-Sonic Power Supply

G-Sonic Power Supply The 230VAC power supply for G-Sonic 5 - 50 models. Converts the mains voltage into 24VDC for the operation of the electronics. Warranty 2 years

€95.00*

G-Sonic repair

Repair, general function control and frequency test Remark: The return to our EU workshop must be complete: electronic control unit and clicker generator. In case of a defect, outside the warranty, you will receive a cost estimate from us. Duration approx. 2 weeks Return costs Europe included

€120.00*

G-Sonic S extension cable 10m 2Pin

€50.00*

G-Sonic S extension cable 15m 2Pin

€60.00*

G-Sonic S Extension cable 20m 2Pin

€80.00*

G-Sonic S extension cable 5m 2Pin

€40.00*

G-Sonic stainless steel float

The click generator float is made of stainless steel and has an M8 internal thread to fix the click generator mounting.Technical Specifications Float stainless steel Wst. No. 1.4571 Diameter 250mm, height 100mm with bracket 85 x 25 x 6mm M8 thread in the middle for fastening to the click generator Two ring eyelets on the outer edge for alignment by means of a light chain, rope, rope Surface stained

€150.00*

Permanent Fix-Adapter Stecker 2-polig SCHUKO Typ F CEE 7 zu Schweiz T11 Fixadapter teilisoliert

Permanent EU/CH Fix-Adapter 2-polig teilisoliert inkl. Dichtungsscheibe Mehr Sicherheit durch teilisolierter Schweizer Stecker. Einfache Montage, schnell fest und permanent montiert. Max. 10 A / 250 V CE Zertifiziert für Europa Schweizer Norm SEV 1011:2009/A1:2012. CE-Norm IEC 60884-1: 2002 + A1: 2006, IEC 60884-2-5: 1995 Permanenter Adapter der Montage, nicht mehr entfernt werden kann IP44-Spritzwasserschutz (Dichtungsscheibe zwischen den Adapter und Schuko-Stecker) Dieses Produkt entspricht der Schweizer Norm SEV 1011:2009/A1:2012. Die zertifizierte Anwendung der CE-Norm IEC 60884-1: 2002 + A1: 2006, IEC 60884-2-5: 1995 sowie der SEV Norm 1011:2009/A1:2012 garantieren höchste Qualitätsstandards. Das Produkt entspricht der Verordnung über elektrische Niederspannungserzeugnisse (NEV).

€6.50*

Permanent Fix-Adapter Stecker SCHUKO (Typ F CEE 7) zu Schweiz (T12) Fixadapter 3- polig teilisoliert schwarz

Permanent Fix-Adapter Stecker 3-polig SCHUKO Typ F CEE7 EU/Schweiz T12 teilisoliert

Permanent EU/CH Fix-Adapter 3-polig teilisoliert inkl. Dichtungsscheibe Mehr Sicherheit durch teilisolierter Schweizer Stecker. Einfache Montage, schnell fest und permanent montiert. Max. 10 A / 250 V CE Zertifiziert für Europa Zertifizierte Schweizer SEV Norm 1011:2009/A1:2012 Permanenter Adapter der Montage, nicht mehr entfernt werden kann IP44-Spritzwasserschutz (Dichtungsscheibe zwischen den Adapter und Schuko-Stecker) Dieses Produkt entspricht der Schweizer Norm SEV 1011:2009/A1:2012. Die zertifizierte Anwendung der CE-Norm IEC 60884-1: 2002 + A1: 2006, IEC 60884-2-5: 1995 sowie der SEV Norm 1011:2009/A1:2012 garantieren höchste Qualitätsstandards. Das Produkt entspricht der Verordnung über elektrische Niederspannungserzeugnisse (NEV).

€6.50*

Tip

PO4 Phosphate qensitive quick test from range 0.02 - 1.8 mg/l

PO4 Phosphate sensitive test set The phosphate test set measures the smallest amounts of phosphate in water (tap water, groundwater, pond water) in the following gradations: 0.02 / 0.05 / 0.1 / 0.2 / 0.4 / 0.6 / 0.8 / 1.2 / 1.8 mg/l The handling is very simple, the results are visible within 10 minutes. Highly sensitive test (from 0.05 mg/l) for laboratory-accurate measurement in fresh and salt water. Determines the phosphate content of the water which, together with the other water values, is responsible for undesirable algae growth. Sufficient for approx. 50 measurements.Includes: Glass cuvettes Comparator system syringe Colour chart

€19.50*

Tip

Gartenteich Wassertest - JBL ProAquaTest Easy 7in1

Water test strips for quick water testing 7 in 1

Water test strips pack 7 in 1 for rapid testing of pond waterDetermines the water quality in seconds. Simply dip in and read off the 7 water values / results. Disinfectant in tap water: chlorine test Acidity of the water: pH test from 6.4 to 9.0 Stability of the water: KH test from 0 to 20 °dKH Total hardness of the water: GH test from 0 to 20 °dKH Toxic nitrogen compound: NO2 from 0 to 10 mg/l Cause of algae: NO3 from 0 to 250 mg/l Main plant nutrient (CO2 content from table) Healthy water in the garden pond The correct water values for the pond water have many influencing factors and depend on the source water, the plants, the impurities in the pond, the number of fish and much more. Clear water can be polluted and promote algae growth. If the values are poor, algae can form or the pond can tip over due to a lack of oxygen. Regular monitoring and adjustment of the water values is important for a healthy garden pond. This simple water test serves as a guide. How to use Immerse the test strip in the pond water and move it in the pond for 2-3 seconds. Remove the test strip from the water and hold it horizontally to allow the water to drip off. After 60 seconds, compare the values on the test strip with the colour scale on the packaging. Note Store test strips in a cool, dry place. Only remove the number of strips immediately required. In the JBL online laboratory you can analyse your measured water values free of charge and have recommendations displayed.

€17.50*