PO4 Phosphate qensitive quick test from range 0.02 - 1.8 mg/l
Product number:
1009959
Detailed information on the water values.
- Simply measure PO4 in very small quantities.
Phosphates are the main nutrients of algae. Together with the other nutrients in the water, just 1 g of phosphorus is enough to cause 10 kg of algae to grow.
Product information "PO4 Phosphate qensitive quick test from range 0.02 - 1.8 mg/l"
PO4 Phosphate sensitive test set
The phosphate test set measures the smallest amounts of phosphate in water (tap water, groundwater, pond water) in the following gradations: 0.02 / 0.05 / 0.1 / 0.2 / 0.4 / 0.6 / 0.8 / 1.2 / 1.8 mg/l
The handling is very simple, the results are visible within 10 minutes. Highly sensitive test (from 0.05 mg/l) for laboratory-accurate measurement in fresh and salt water.
- Determines the phosphate content of the water which, together with the other water values, is responsible for undesirable algae growth.
- Sufficient for approx. 50 measurements.
Includes:
- Glass cuvettes
- Comparator system syringe
- Colour chart
Login
Similar Items
Tip
Water test strips for quick water testing 7 in 1
€17.50*
Water test strips pack 7 in 1 for rapid testing of pond waterDetermines the water quality in seconds. Simply dip in and read off the 7 water values / results. Disinfectant in tap water: chlorine test Acidity of the water: pH test from 6.4 to 9.0 Stability of the water: KH test from 0 to 20 °dKH Total hardness of the water: GH test from 0 to 20 °dKH Toxic nitrogen compound: NO2 from 0 to 10 mg/l Cause of algae: NO3 from 0 to 250 mg/l Main plant nutrient (CO2 content from table) Healthy water in the garden pond The correct water values for the pond water have many influencing factors and depend on the source water, the plants, the impurities in the pond, the number of fish and much more. Clear water can be polluted and promote algae growth. If the values are poor, algae can form or the pond can tip over due to a lack of oxygen. Regular monitoring and adjustment of the water values is important for a healthy garden pond. This simple water test serves as a guide. How to use Immerse the test strip in the pond water and move it in the pond for 2-3 seconds. Remove the test strip from the water and hold it horizontally to allow the water to drip off. After 60 seconds, compare the values on the test strip with the colour scale on the packaging. Note Store test strips in a cool, dry place. Only remove the number of strips immediately required.
In the JBL online laboratory you can analyse your measured water values free of charge and have recommendations displayed.